Beautiful Life

While the market is demanding high demand from the market to reduce processing steps, reduce material waste and dry process and other factors continue to drive, is also a strong impetus to the 10mw laser pointer manufacturers and laser system integrators to provide continuous discussion, asking them not only to provide Traditional mechanical processing alternatives, but also continue to enhance the overall performance of laser processing solutions to the processing quality, product yield, processing speed and mass production has been a breakthrough.

In the processing requirements, the above-mentioned applications usually require the use of very sophisticated cutting, drilling and grooving processes on these brittle and brittle materials, which makes the traditional milling, grinding and grinding processes Of the challenge, because the material is extremely thin and very brittle, the process of application due to contact with the application of any stress on the material, may lead to material fragmentation, and ultimately scrapped. With the application of these brittle materials in products such as LEDs, smart phones, wearable equipment, etc., the laser, 50mw laser pointer systems and related research institutions that are working on such brittle materials are also increasing, and their efforts have This kind of brittle materials laser processing technology continues to develop.

If the laser retroreflective protection capability is not strong enough, even if the high power QBH or QD transport fiber designed to withstand the kilogram of retroreflective peeling off the fiber cladding, the back-emitting laser beam passes through the fiber core of the transfer line Reflected back into the fiber inside the laser. Even technology-leading fiber laser manufacturers have experienced a variety of painful lessons, system integrators have realized that the laser fiber coupler, or laser module will be damaged.

In contrast to the usual performance of third parties, and depending on the material and settings, the fiber laser has a retroreflective capability of up to 3 to 30 times the resistance due to its special optical configuration. In particular, the CF laser system incorporates these protection schemes that have demonstrated the offset error of the focal position in the millimeter scale that allows large amounts of brass and brass to be tested. Compared to other fiber 300mw laser pointer manufacturers, it shows a smaller focus position offset error; when operating a CF laser with a unique proprietary protection scheme, the reliability of the laser and the performance of almost no failure have been demonstrated.

Glass, ceramics, sapphire and other brittle non-metallic materials, precision machining, usually using ultra-fast laser. Ultrafast laser pulse duration is extremely short, in nanoseconds, picoseconds and even femtosecond, the role of moderate laser energy on the surface of the material, by breaking the material chemical bond to achieve the purpose of material removal, in this process, the laser energy It is too late to pass around the processing range, the process has ended, so the heat is almost negligible, the material does not produce thermal damage.

http://laserpointers.cocolog-nifty.com/blog/2017/07/three-dimension.html

http://laserpo.seesaa.net/article/451475395.html

http://my.mmosite.com/7765026/blog/item/laser_chiller_installation_precautions.html